RealFLO5

How is the flow computer application written to the controller?

The flow computer application C or C++ file has to be written to the controller in order execute the gas flow calculations; and although both TelePACE and ISaGRAF applications can accomplish this task, it is easily and most conveniently handled by the RealFLO application.
To write the flow computer application to the controller using RealFLO:

Start the RealFLO application.
In Expert Mode, open a new or already-existing RealFLO file.
Establish communication with the controller.
Select the Configuration | Replace Flow Computer command.

Select Flow Computer
Select Next. The appropriate Flow Computer file version will be written to the controller.