Back to FAQ's
How is the number of flow runs written to the controller?
The number of flow runs that are required by the user, as well as the Flow Computer ID, must be written the controller before the flow run configuration is written.
- To write the number of flow runs and the Flow Computer ID to the controller:
- Select the Configuration | Flow Computer Setup command. The Flow Computer Setup dialog is displayed.
- Select the number of flow runs required from the Number of Runs pull-down box. This number must be less than or equal to the number of runs supported by the controller. See FAQ #3 for details.
- Enter a Flow Computer ID into the Flow Computer ID entry box.
- Select the OK button to close the dialog.
- This configuration can be written to the controller at this time by selecting the Configuration | Write Configuration command or may be written at a later time with other configuration parameters.
