ISaGRAF I/O Configuration Libraries
IEC61131_IOCONFIG.ZIP
This procedure installs an I/O Configuration library for each configuration of SCADAPack controller and gas flow computer. New ISaGRAF projects may optionally be created based on any one of these I/O configurations. The new project is created with dictionary variables for all I/O points already defined and each I/O variable assigned to its I/O connection.
There are 22 (.RIA) files associated with this library.
To install the libraries:
- Select the following link:
IEC 61131 IOCONFIG.zip
- Select the Open button. (Winzip is opened)
- Select the Use Evaluation Version button. (The Winzip program list is displayed)
- From Winzip, select the sample file in the display list and then extract it to a target folder on your computer.
- Exit Winzip.
- Open the ISaGRAF Projects application.
- Select the Tools | Libraries command.
- From the Libraries dialog select IO configurations from the drop down menu.
- Select the Tools | Archive command.
- Select the Browse button.
- Browse to the target folder specified during the previous download procedure.
- Highlight all 22 library names in the Archive list and select the Restore button. The libraries are restored to the ISaGRAF Workbench.
Note: some libraires for newer controllers (e.g. sp330, sp334) will require ISaGRAF Extensions 2.40 or newer.
- Select the Close button.
- Close the Libraries dialog.
To create a project using an I/O Configuration:
- Open the ISaGRAF Projects application.
- Select the File | New command.
- Enter a name for the new project and select an IO configuration from the drop down menu.
- Select the OK button.
