The following software products may be selected for free download. Each is provided as a zip file containing the Product Installation and its Release Notes. Download the zip file to your PC. Unzip the file and run Setup.exe to install the application.
Accutech Manager
Integral to the Accutech product offering is Accutech Manager, the Windows-based services management software that provides a user-friendly environment for field unit configuration and diagnostics. The product also functions as an effective and useful network management tool and can be used for temporary data collection and testing.
Firmware Loader
Firmware Loader is a utility for updating firmware in our products. This utility also contains the most current firmware versions for all SCADAPack and SCADAPack Gas Flow & Pressure products. For SCADAPack E RTUs please refer to the SCADAPack E Utilities download below.
FlowStation Configurator (includes FlowStation Firmware)
FlowStation Configurator is a utility for updating firmware in the FlowStation 110 and includes the latest version of FlowStation firmware. FlowStation Configurator can also be used to alter communications settings and backup / restore FlowStation configurations.
IEC61131-3 Workbench and Extensions (non-SCADAPack E)
ISaGRAF Workbench is the IEC 61131-3 programming environment used with the SCADAPack family of controllers. ISaGRAF Workbench operates in demo mode when used without a license. ISaGRAF Extensions add SCADAPack-specific (non-SCADAPack E) functionality to the workbench.
Important Note: After uploading the zipped ISaGRAF Workbench Installation file to your computer, you must create a temporary file folder, located just below the root C:\ folder, (for example C:\Install), and then extract all workbench installation files to this temporary folder. The installer’s executable file must then be run from this location. Running the installer from any other folder level location will fail.
IEC61131-3 for SCADAPack E (includes ISaGRAF Workbench) and SCADAPack E Utilities
ISaGRAF Workbench is the IEC 61131-3 programming environment used with SCADAPack E controllers. ISaGRAF Workbench operates in demo mode when used without a license.
SCADAPack E Utilities is a group of utilities used with the SCADAPack E controllers and is comprised of the E Configurator, Difference Generator, Security Administrator and Reference Manuals.
Important Note: After uploading the zipped ISaGRAF Workbench Installation file to your computer, you must create a temporary file folder, located just below the root C:\ folder, (for example C:\Install), and then extract all workbench installation files to this temporary folder. The installer’s executable file must then be run from this location. Running the installer from any other folder level location will fail.
SCADALog Data Converter
SCADALog Data Converter is a data log conversion utility which converts binary files saved on USB storage devices to CSV file format. CSV files can then be ported to other applications for subsequent manipulation and analysis.
SCADAPack Vision
SCADAPack Vision is the configuration tool for the SCADAPack Vision10 and SCADAPack Vision60 operator interface terminals.
4000-Series Configurator
The SCADAPack Gas Flow Computer & Transmitters Configurator is a configuration tool for SCADAPack Gas Flow & Pressure transmitters.
SDI-12 Application
This application enables SDI-12 communication on SCADAPack 32 and 300 line of controllers for use with the 5915 SDI-12 interface module.
Telepace Studio Evaluation
This is an evaluation version of Telepace Studio, the ladder logic programming environment for the SCADAPack and SCADAPack Gas Flow & Pressure family of controllers. This evaluation version has the same features as the fully licensed version except the ladder logic size is limited.
Trio Firmware
Download the latest firmware for the Trio M, E, K and J-Series data radios.
J-Series firmware zipped file also includes MIB files for SNMP functionality.
Note: K-Series units manufactured with firmware versions earlier than R1.2.0 are not compatible with firmware releases R2.0.0+. These units must be returned to Control Microsystems for upgrade. Please contact technicalsupport@controlmicrosystems.com for assistance.
