I/O Test

I/O Test

I/O Test mode

Disabled

I/O Test mode:

Enable I/O point override for testing. When enabled individual I/O points may be overriden.

Digital Input
I/O	value	description
DI0	ON	Pump 1 Run Indication
DI1	OFF	Pump 1 Seal Fail
DI2	OFF	Pump 1 Overload
DI3	ON	Pump 1 Auto Indication
DI4	OFF	Pump 1 Hand Indication
DI5	OFF	Pump 2 Run Indication
DI6	OFF	Pump 2 Seal Fail
DI7	OFF	Pump 2 Overload
DI8	ON	Pump 2 Auto Indication
DI9	OFF	Pump 2 Hand Indication
DI10	OFF	Reserved
DI11	OFF	Reserved
DI12	OFF	Reserved
DI13	OFF	Operator on site
DI14	OFF	Phase Failure
DI15	ON	Backup High Float

Counter Input used as Digital Input
I/O	value	description
C0	61258	Reserved
C1	OFF	Door switch
C2	OFF	Sump fail

Analog Input
I/O	Raw value	Scaled value	description
AI0	8605	3.2 ft	Level Transducer, Tank 1
AI1	22410	NA	Reserved
AI2	22927	NA	Reserved
AI3	1354	NA	Reserved
AI4	0	0.0 A	Pump 1 Current (station current)
AI5	0	0.0 A	Pump 2 Current
AI6	0	0.0 A	Reserved
AI7	7	NA	User Assign

Digital Output
I/O	Value	Override	Override Value	Description
DO0	ON			Pump 1 Run
DO1	OFF			Pump 2 Run
DO2	OFF			Reserved
DO3	OFF			Flush Valve
DO4	OFF			Reserved
DO5	OFF			User Assign 1
DO6	OFF			User Assign 2
DO7	OFF			User Assign 3
DO8	ON			Modem Power
DO9	OFF			Alarm light / Station Fail