OperatePump Power

Pump Station Power Options

Pump 1: Current input used
Pump 1: Current input used:

Select Yes when Pump 1 has a pump current transducer connected to the FlowStation Pump 1 Current analog input. Select No otherwise.

Pump 2: Current input used
Pump 2: Current input used:

Select Yes when Pump 2 has a pump current transducer connected to the FlowStation Pump 2 Current analog input. Select No otherwise.

Station Current uses Pump 1 Current Input
Station Current uses Pump 1 Current Input:

Select Yes to use the Pump 1 current transducer for the station pump current. Select No otherwise.

Pump Current Transducer Settings

Pump 1: Signal type
  • low level cal. point of A at mA
  • high level cal. point of A at mA
    • Pump 1: Signal type:

    The analog input signal range for the Pump 1 current transducer.

    Pump 2: Signal type
  • low level cal. point of A at mA
  • high level cal. point of A at mA
    • Pump 2: Signal type:

    The analog input signal range for the Pump 2 current transducer.

    Pump Settings

      1
     2
    High Current threshold
    • A
    • A
    High Current threshold:

    The maximum current, in amperes (A), that is permitted before a high pump current alarm is logged.

    Low Current threshold
    • A
    • A
    Low Current threshold:

    The minimum current, in amperes (A), that is permitted before a low pump current alarm is logged.

    Pump run time till current sampled
    • seconds
    • seconds
    Pump run time till current sampled:

    The number of seconds of pump run time to wait before sampling the pump current.